How does society continue to protect itself without putting the environment at risk?
Use biopolymers that are produced from renewable crop resources that are not only biodegradable and compostable, but the crop pulls CO2 from the atmosphere. PPE made from biopolymers will not have the adverse effect on our environment and if they end up in our oceans, they will not harm the detritus on the ocean floors.
Environmental benefit happens the moment a VIRALOC ECO™ mask is purchased.
The green alternative
Most masks are made of plastics that take hundreds of years to decompose. VIRALOC ECO™ masks have material that come from plant-based biopolymers that are fully compostable.
Medical grade and certified
This product is tested to international standards, including ASTM F2100 for breathability, filtration, splash resistance, and flammability. Truly the gold standard for protection.
Carbon offsets
Each VIRALOC ECO™ mask produces 55% less CO2 emissions than a synthetic mask over its life cycle. Our masks come with carbon credits that can be used to meet Paris Agreement commitments.
All materials are made in North America.
Product Specifications
| Performance | Level 1 | Level 2 | Level 3 | |
|---|---|---|---|---|
| Bacterial filtration efficiency (BFE%) | ≥95% | ≥98% | ≥98% | ASTM F2101 |
| Particle filtration efficiency (PFE%) | ≥95% | ≥98% | ≥98% | ASTM F2299 |
| Differential pressure (Δp mm H20/cm2) | <5.0 | <6.0 | <6.0 | EN 14683 Annex C |
| Splash resistance (mmHg) | 80 | 120 | 160 | ASTM F1862 |
| Flame spread | Class 1 | Class 1 | Class 1 | 16 CFR Part 1610 |
Donning instructions
- Hold the mask by the ear loops with the colored side facing outwards and the nose bridge upwards, and place both ear loops around both ears.
- Bend the nose clip to match the shape of the nose to prevent unfiltered air from entering.
- Pull the mask to your chin to produce a tight seal.
Application
Worn by personnel to cover the mouth, nose, and chin, the mask provides a physical barrier to block exhalation or ejection of pollutants from mouth and nose, and to reduce breathing in airborne particles. This device is not designed, sold or intended for use except as indicated. This mask is not a respirator.
Notice
To the extent permitted by law, Precision ADM Inc. and Precision ADM Medical Inc. shall not be liable for any loss or damage including any loss of business, loss of profits, or for any indirect, special, incidental or consequential loss or damage arising from reliance upon any information herein provided. Nothing in this statement will be deemed to exclude or restrict Precision ADM Inc. and Precision ADM Medical Inc.’s liability for death or personal injury arising from its negligence. Non-sterile product. One-time use only. Expiration: 2 years after production.
Material specifications
| Inner layer | Compostable spunbond |
| Middle layer | Compostable melt blown |
| Outer layer | Compostable spunbond |
| Ear loops | Removable elastic cord |
| Nose clip | Removable aluminum wire |
VIRALOC ECO™ procedural masks contain NO GRAPHENE
Warnings and limitations
- Product not intended to provide protection against pathogenic biological airborne particulates.
- Not recommended for use in aerosol generating procedures and any clinical conditions where there is significant risk of infection through inhalation exposure.
- Failure to properly use and maintain this product could result in illness or even death.
- Only for one-time use, please destroy and dispose according to regulations after use.
- Please use within validity period.
- Do not use if package is damaged.
- Please refer to the instructions before use.
- Use this product immediately after the package is opened. Avoid hand contact within the interior part of the mask. Do not wash.
- Intended for use in environments with moderate fluid exposure.
- Product is not intended to replace the need for FDA-cleared surgical masks or FDA-cleared or authorized respirators.
Composting VIRALOC ECO™ masks
This product is not eligible to be composted at home but may be eligible to be put into your municipal composting program, after removing the components indicated below.
Please verify with your municipal composting program that this product can be processed, information on locations can be found here.
Product Specifications
| Performance | Level 1 | Level 2 | Level 3 | |
|---|---|---|---|---|
| Bacterial filtration efficiency (BFE%) | ≥95% | ≥98% | ≥98% | ASTM F2101 |
| Particle filtration efficiency (PFE%) | ≥95% | ≥98% | ≥98% | ASTM F2299 |
| Differential pressure (Δp mm H20/cm2) | <5.0 | <6.0 | <6.0 | EN 14683 Annex C |
| Splash resistance (mmHg) | 80 | 120 | 160 | ASTM F1862 |
| Flame spread | Class 1 | Class 1 | Class 1 | 16 CFR Part 1610 |
Donning instructions
- Hold the mask by the ear loops with the colored side facing outwards and the nose bridge upwards, and place both ear loops around both ears.
- Bend the nose clip to match the shape of the nose to prevent unfiltered air from entering.
- Pull the mask to your chin to produce a tight seal.
Application
Worn by personnel to cover the mouth, nose, and chin, the mask provides a physical barrier to block exhalation or ejection of pollutants from mouth and nose, and to reduce breathing in airborne particles. This device is not designed, sold or intended for use except as indicated. This mask is not a respirator.
Notice
To the extent permitted by law, Precision ADM Inc. and Precision ADM Medical Inc. shall not be liable for any loss or damage including any loss of business, loss of profits, or for any indirect, special, incidental or consequential loss or damage arising from reliance upon any information herein provided. Nothing in this statement will be deemed to exclude or restrict Precision ADM Inc. and Precision ADM Medical Inc.’s liability for death or personal injury arising from its negligence. Non-sterile product. One-time use only. Expiration: 2 years after production.
Material specifications
| Inner layer | Polypropylene spunbound nonwoven fabric |
| Middle layer | Polypropylene melt-blown nonwoven |
| Outer layer | Polypropylene spunbound nonwoven fabric |
| Ear loops | Polyester/nylon spandex band |
| Nose clip | Metal wire with plastic covering |
VIRALOC™ procedural masks contain NO GRAPHENE
Warnings and limitations
- Product not intended to provide protection against pathogenic biological airborne particulates.
- Not recommended for use in aerosol generating procedures and any clinical conditions where there is significant risk of infection through inhalation exposure.
- Failure to properly use and maintain this product could result in illness or even death.
- Only for one-time use, please destroy and dispose according to regulations after use.
- Please use within validity period.
- Do not use if package is damaged.
- Please refer to the instructions before use.
- Use this product immediately after the package is opened. Avoid hand contact within the interior part of the mask. Do not wash.
- Intended for use in environments with moderate fluid exposure.
- Product is not intended to replace the need for FDA-cleared surgical masks or FDA-cleared or authorized respirators.