Compostable* Procedural Masks

How does society continue to protect itself without putting the environment at risk?

Use biopolymers that are produced from renewable crop resources that are not only biodegradable and compostable, but the crop pulls CO2 from the atmosphere. PPE made from biopolymers will not have the adverse effect on our environment and if they end up in our oceans, they will not harm the detritus on the ocean floors.

The green alternative

Most masks are made of plastics that take hundreds of years to decompose. VIRALOC eco™ masks have material that come from plant-based biopolymers that are fully compostable*.

Medical grade and certified

This product is tested to international standards, including ASTM F2100 for breathability, filtration, splash resistance, and flammability. Truly the gold standard for protection.

Carbon offsets

Each VIRALOC eco™ mask produces approximately 60% less CO2 emissions than a synthetic mask over its life cycle. Our masks come with carbon credits that can be used to meet Paris Agreement commitments†.

Environmental benefits happens the moment a VIRALOC eco™ mask is purchased.

† If you are interested in becoming a member of the PADM Medical Carbon Credits program, please contact our sustainability chair in order to obtain further information info@padmmedical.com

Product Specifications

Performance Level 1 Level 2 Level 3  
Bacterial filtration efficiency (BFE%) ≥95% ≥98% ≥98% ASTM F2101
Particle filtration efficiency (PFE%) ≥95% ≥98% ≥98% ASTM F2299
Differential pressure (Δp mm H20/cm2) <5.0 <6.0 <6.0 EN 14683 Annex C
Splash resistance (mmHg) 80 120 160 ASTM F1862
Flame spread Class 1 Class 1 Class 1 16 CFR Part 1610

Instructions for Use

  1. Hold mask by ear loops with the nose clip at the top. Ensure the logo side or colored side is facing outward. Place one ear loop around each ear.
  2. Bend the nose clip to match the shape of the nose and ensure there are no gaps.
  3. While holding the nose clip at the bridge of your nose, pull the mask down under your chin.
  4. Properly dispose of the mask by touching only the ear loops.

Indications for Use

Intended to be worn to protect both the patient and healthcare professional from transfer of microorganisms, body fluids, and particulate material. To be used in infection control practices to reduce the potential exposure to blood and body fluids. This is a single use, non-sterile, disposable device.

Notice

To the extent permitted by law, Precision ADM Inc. and Precision ADM Medical Inc. shall not be liable for any loss or damage including any loss of business, loss of profits, or for any indirect, special, incidental or consequential loss or damage arising from reliance upon any information herein provided. Nothing in this statement will be deemed to exclude or restrict Precision ADM Inc. and Precision ADM Medical Inc.’s liability for death or personal injury arising from its negligence. Non-sterile product.

Material specifications

Inner layer Composable spunbond nonwoven fabric
Middle layer Compostable nonwoven meltblown fabric
Outer layer Composable spunbond nonwoven fabric
Ear loops Removable elastic cord
Nose clip Removable aluminum bar

Warnings and limitations

  1. Only for one-time use, please destroy and dispose according to regulations after use.
  2. Do not use if package is damaged.
  3. Please refer to the instructions before use.
  4. Use this product immediately after the package is opened. Avoid hand contact within the interior part of the mask.
  5. Do not wash.
  6. Procedural masks are not intended to provide protection against pathogenic biological airborne particulates.
  7. Procedural masks are not recommended for use in aerosol generating procedures and any clinical conditions where there is significant risk of infection through inhalation exposure.
  8. Non-sterile
  9. Failure to follow instructions may lead to transfer of microorganisms, blood and body fluids, and particulate materials.
  10. Store package in climatic conditions ranging from -4 °F (-20 °C) to +77 °F (+25 °C) and not exceeding 50% relative humidity.

Our procedural masks contain NO GRAPHENE

Composting VIRALOC eco™ masks

* This product can be put into aerobic municipal and industrial composting facilities after removing the nose clip and ear loops. Please verify with the corresponding facility that this product can be processed. This product is not eligible for home composting.

Information on composting locations can be found here.

If you have a previously existing contract, you can fill out this order form for fast ordering!

Established contract number required to submit an order