Product Specifications
| Performance | Level 1 | Level 2 | Level 3 | |
|---|---|---|---|---|
| Bacterial filtration efficiency (BFE%) | ≥95% | ≥98% | ≥98% | ASTM F2101 |
| Particle filtration efficiency (PFE%) | ≥95% | ≥98% | ≥98% | ASTM F2299 |
| Differential pressure (Δp mm H20/cm2) | <5.0 | <6.0 | <6.0 | EN 14683 Annex C |
| Splash resistance (mmHg) | 80 | 120 | 160 | ASTM F1862 |
| Flame spread | Class 1 | Class 1 | Class 1 | 16 CFR Part 1610 |
Instructions for Use
- Hold mask by ear loops with the nose clip at the top. Ensure the logo side or colored side is facing outward. Place one ear loop around each ear.
- Bend the nose clip to match the shape of the nose and ensure there are no gaps.
- While holding the nose clip at the bridge of your nose, pull the mask down under your chin.
- Properly dispose of the mask by touching only the ear loops.
Indications for Use
Intended to be worn to protect both the patient and healthcare professional from transfer of microorganisms, body fluids, and particulate material. To be used in infection control practices to reduce the potential exposure to blood and body fluids. This is a single use, non-sterile, disposable device.
Notice
To the extent permitted by law, Precision ADM Inc. and Precision ADM Medical Inc. shall not be liable for any loss or damage including any loss of business, loss of profits, or for any indirect, special, incidental or consequential loss or damage arising from reliance upon any information herein provided. Nothing in this statement will be deemed to exclude or restrict Precision ADM Inc. and Precision ADM Medical Inc.’s liability for death or personal injury arising from its negligence. Non-sterile product.
Material specifications
| Inner layer | Polypropylene spunbound nonwoven fabric |
| Middle layer | Polypropylene meltblown nonwoven |
| Outer layer | Polypropylene spunbound nonwoven fabric |
| Ear loops | Elastic cord |
| Nose clip | Aluminum bar |
Warnings and limitations
- Only for one-time use, please destroy and dispose according to regulations after use.
- Do not use if package is damaged.
- Please refer to the instructions before use.
- Use this product immediately after the package is opened. Avoid hand contact within the interior part of the mask.
- Do not wash.
- Procedural masks are not intended to provide protection against pathogenic biological airborne particulates.
- Procedural masks are not recommended for use in aerosol generating procedures and any clinical conditions where there is significant risk of infection through inhalation exposure.
- Non-sterile
- Failure to follow instructions may lead to transfer of microorganisms, blood and body fluids, and particulate materials.
Our procedural masks contain NO GRAPHENE
If you have a previously existing contract, you can fill out this order form for fast ordering!